Lower Control Arm Prying Tool, 7/8" Pry Bar

Lower control arm work, done right. Separating the ball joint and bushing on a lower control arm is hard to do cleanly without the right leverage point, and this S-hook tool is built for a 7/8 inch diameter pry bar.

Why you need it

Control arms fight back. The S-hook gives a pry bar something solid to bear on, so you can lever the arm into or out of position without gouging it.

Choose your color

• Blue
• Black

Good to know

• Designed for a 7/8 inch diameter pry bar.
• Fitment: not vehicle-specific. A general suspension tool for European-car work.